SOLIDWORKS to ENF

Section Name [SW2ENF]

CalcElementNumber

Output the element number in XML log

  • Default Value: 0
  • Values
    • 0: OFF
    • 1: ON

CalcMassProperty

Output mass properties (Volume, Surface area, gravity) in XML log.

  • Default Value: 0
  • Values
    • 0: OFF
    • 1: ON

ConvertCSys

Specify whether to convert coordinate systems.

  • Default Value: 1
  • Values
    • 0: Don’t convert coordinate systems
    • 1: Convert coordinate systems

ConvertInvisiblePart

Specify whether to convert invisible parts.

  • Default Value: 1
  • Values
    • 0: Don’t convert invisible parts
    • 1: Convert invisible parts as invisible parts

ConvertInvisibleVolume

Specify whether to translate hidden volumes

  • Default Value: 1
  • Values
    • 0: Don’t translate hidden volumes
    • 1: Translate hidden volumes as hidden volumes
    • 2: Translate hidden volumes as shown volumes

ConvertRefAxis

Specify whether to convert reference axes.

  • Default Value: 1
  • Values
    • 0: Don’t convert reference axes
    • 1: Convert reference axes

ConvertRefPlane

Specify whether to convert reference planes.

  • Default Value: 1
  • Values
    • 0: Don’t convert reference planes
    • 1: Convert visible reference planes only
    • 2: Convert all reference planes regardless of the visibility

ConvertSketch

Specify whether to convert sketches.

  • Default Value: 1
  • Values
    • 0: Don’t convert sketches
    • 1: Convert sketches

Mode

Convert with XVL mode.
none: normal mode
XVL: Xvl mode
  • Default Value:

ModifyDocName

If a component has some configurations, add configuration’s name to component name.

  • Default Value: 1
  • Values
    • 0: Don’t add
    • 1: Add

PartwiseConversion

Specify whether to enable “memory saving” mode

  • Default Value: 0
  • Values
    • 0: Don’t enable memory saving mode
    • 1: Enable memory saving mode

ResolveComponent

Specify whether to translate suppressed components.

  • Default Value: 0
  • Values
    • 0: Don’t translate suppressed components
    • 1: Translate suppressed components

SpecifyConfiguration

Specify the configuration to apply to the top assembly by its name. (Multiple selection is not available.)
A conversion error will occur when the specified configuration does not exist in the source model.
  • Default Value:

StructureMode

Specify whether to translate in Assembly Structure mode

  • Default Value: 0
  • Values
    • 0: Don’t translate in Assembly Structure mode
    • 1: Translate in Assembly Structure mode

WriteOldFile

Specify the ENF version.
Please use “WriteOldFileRev” to specify ENF revisions.
Below are the supported file versions;
2.2, 2.6, 3.0, 3.2, 3.3
  • Default Value: 0
  • Values
    • 0: Export ENF in the latest version
    • 2: Export ENF in version 2
    • 3: Export ENF in version 3

WriteOldFileRev

Specify the ENF revision.
Please use “WriteOldFile” to specify the ENF version.
Below are the supported file versions;
2.2, 2.6, 3.0, 3.2, 3.3
  • Default Value: -1
  • Values
    • -1: Export ENF of the latest revision
    • 0: Export ENF of revision 0
    • 2: Export ENF of revision 2
    • 3: Export ENF of revision 3
    • 6: Export ENF of revision 6

XConvertDimension

Specify whether to convert Dimension. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Dimension
    • 1: Convert Dimension

XConvertGDT

Specify whether to convert GDT, Datum, DatumTarget. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert GDT
    • 1: Convert GDT

XConvertLineWeld

Specify whether to convert LineWeld. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert LineWeld
    • 1: Convert LineWeld

XConvertMaterial

Specify whether to convert material properties (material name and density). (Attribute)

  • Default Value: 0
  • Values
    • 0: Don’t convert material properties
    • 1: Convert material properties

XConvertNote

Specify whether to convert Note. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Note
    • 1: Convert Note

XConvertSurfFinish

Specify whether to convert SurfaceFinish. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Surface Finish
    • 1: Convert Surface Finish

XConvertUserProperty

Specify whether to convert user properties. (Attribute)

  • Default Value: 0
  • Values
    • 0: Don’t convert user properties
    • 1: Convert user properties

XConvertView

Specify whether to convert 3D views and annotation views.

  • Default Value: 0
  • Values
    • 0: Don’t convert views
    • 1: Convert 3D views only (Don’t convert annotation views)
    • 2: Convert annotation views only (Don’t convert 3D views)
    • 3: Convert both 3D views and annotation views