Creo Parametric to ENF

Section Name [PRO2ENF]

AbsoluteCS

Select reference coordinate system

none:

Convert with default coordinate system.

Coordinate System name:

Convert with specified coordinate system.

• Default Value:

CalcElementNumber

Output the element number in XML log

• Default Value: 0
• Values
  • 0: OFF
  • 1: ON

CalcMassProperty

Specify whether to convert the mass properties (volume, surface area, gravity and density), and output volume, surface area, and gravity to XML log.

• Default Value: 0
• Values
  • 0: Don’t output mass properties
  • 1: Output mass properties

ConvAsmBdy

Specify whether to create a derived body to convert elements that belong to an assembly (*.asm) to it.

• Default Value: 1
• Values
  • 0: Don’t convert assembly elements
  • 1: Create a derived body and convert assembly elements to it

ConvFamInst

Specify whether to convert specified family instances.

Specify

- Empty string: Convert generic instance (Don’t convert family instances)

- Family instance name: Convert specified family instance

• Default Value:

ConvertCombstate

Specify whether to convert combined state.

• Default Value: 0
• Values
  • 0: Don’t convert combined state
  • 1: Convert combined state that belong to top component only
  • 2: Convert all combined states

ConvertDtmAx

Specify whether to convert axis.

• Default Value: 0
• Values
  • 0: Don’t convert axis
  • 1: Convert axis

ConvertDtmCs

Specify whether to convert Csys.

• Default Value: 0
• Values
  • 0: Don’t convert Csys
  • 1: Convert Csys

ConvertDtmCv

Convert DatumCurve

• Default Value: 1
• Values
  • 0: Don’t convert DatumCuve.
  • 1: Convert DatumCurve.

ConvertDtmPl

Specify whether to convert DatumPlane.

• Default Value: 0
• Values
  • 0: Don’t convert DatumPlane
  • 1: Convert DatumPlane

ConvertDtmPt

Convert DatumPoint

• Default Value: 1
• Values
  • 0: Don’t convert DatumPoint.
  • 1: Convert DatumPoint.

ConvertHarness

Specify whether to convert harnesses.

• Default Value: 1
• Values
  • 0: Don’t convert harness.
  • 1: Convert harness.

ConvertPartwise

Specify whether to enable “memory saving” mode

• Default Value: 0
• Values
  • 0: Don’t enable memory saving mode
  • 1: Enable memory saving mode

ConvertQuilt

Convert Quilt

• Default Value: 1
• Values
  • 0: Don’t convert Quilt.
  • 1: Convert Quilt.

ConvertSkeletonModel

Specify whether to convert skeleton models.

• Default Value: 1
• Values
  • 0: Don’t convert
  • 1: Convert skeleton models

ConvertSolid

Convert Solid

• Default Value: 1
• Values
  • 0: Don’t convert Solid.
  • 1: Convert Solid.

ExportBlankedComponent

Specify whether to convert hidden (blanked) Component.

This will be prioritized to “ExportBlankedElement” when both set.

• Default Value: -1

• Values

  • -1: Convert based on the settings specified with “ExportBlankedElement”

    (Effective only when “ExportBlankedElement” is set.)

  • 0: Don’t convert hidden Component

  • 1: Convert hidden Component as hidden Component

  • 2: Convert hidden Component as shown Component

ExportBlankedElement

Specify whether to convert hidden (blanked) elements.

Please note that “ExportBlankedComponent” / “ExportBlankedQuilt” / “ExportBlankedSolid” will be prioritized when they are set.

• Default Value: 1
• Values
  • 0: Don’t convert hidden elements
  • 1: Convert hidden elements as hidden elements
  • 2: Convert hidden elements as shown elements

ExportBlankedQuilt

Specify whether to convert hidden (blanked) Quilt.

This will be prioritized to “ExportBlankedElement” when both set.

• Default Value: -1
• Values
  • -1: Convert based on the settings specified with “ExportBlankedElement”
  • 0: Don’t convert hidden Quilt
  • 1: Convert hidden Quilt as hidden Quilt
  • 2: Convert hidden Quilt as shown Quilt

ExportBlankedSolid

Specify whether to convert hidden (blanked) solid volumes.

This will be prioritized to “ExportBlankedElement” when both set.

• Default Value: -1
• Values
  • -1: Convert based on the settings specified with “ExportBlankedElement”
  • 0: Don’t convert hidden solid volumes
  • 1: Convert hidden solid volumes as hidden solid volumes
  • 2: Convert hidden solid volumes as shown solid elements

ProductMode

Specify whether to apply CADdoctor default setting

• Default Value: 0
• Values
  • 0: ASFALIS mode
  • 1: CADdoctor mode

SimplifiedRep

Specify whether to convert with simplified representation specified by its name.

Please note that this supports user defined simplified representation names only.

It will be converted with master representation when this is not set.

• Default Value:

SimplifiedRepRecoverMode

Specify whether to convert by Master Rep when the input file cannot be read by the simplified representation specified by “SimplifiedRep”.

• Default Value: 0
• Values
  • 0: Don’t convert by Master Rep, and return error
  • 1: Convert by Master Rep

StructureMode

Specify whether to translate in Assembly Structure mode

• Default Value: 0
• Values
  • 0: Don’t translate in Assembly Structure mode
  • 1: Translate in Assembly Structure mode

UseOriginalUnitsystem

Specify whether to convert the unit system.

This is to set a loop-back when converting the unit system in Creo Parametric to Creo Parametric conversion.

• Default Value: 0
• Values
  • 0: Don’t convert the unit system
  • 1: Convert the unit system

WriteOldFile

Specify the ENF version.

Please use “WriteOldFileRev” to specify ENF revisions.

Below are the supported file versions;

2.2, 2.6, 3.0, 3.2, 3.3

• Default Value: 0
• Values
  • 0: Export ENF in the latest version
  • 2: Export ENF in version 2
  • 3: Export ENF in version 3

WriteOldFileRev

Specify the ENF revision.

Please use “WriteOldFile” to specify the ENF version.

Below are the supported file versions;

2.2, 2.6, 3.0, 3.2, 3.3

• Default Value: -1
• Values
  • -1: Export ENF of the latest revision
  • 0: Export ENF of revision 0
  • 2: Export ENF of revision 2
  • 3: Export ENF of revision 3
  • 6: Export ENF of revision 6

XConvertDimension

Specify whether to convert Dimension. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert Dimension
  • 1: Convert Dimension

XConvertFlatToScreenAF

Specify how to convert flat-to-screen annotations.

This is effective only when annotation translation is enabled with one or more of the followings;

- “XConvertNote=1”

- “XConvertGDT=1”

- “XConvertSurfFinish=1”

• Default Value: 1
• Values
  • 0: Don’t convert flat-to-screen annotations
  • 1: Convert flat-to-screen annotations seen from the default orientation
  • 2: Convert flat-to-screen annotations seen from the standard orientation

XConvertGDT

Specify whether to convert GDT, Datum, DatumTarget. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert GDT
  • 1: Convert GDT

XConvertMaterial

Specify whether to convert material properties. (Attribute)

• Default Value: 0
• Values
  • 0: Don’t convert material properties
  • 1: Convert material properties

XConvertNote

Specify whether to convert Note. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert Note
  • 1: Convert Note

XConvertSurfFinish

Specify whether to convert SurfaceFinish. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert SurfaceFinish
  • 1: Convert SurfaceFinish

XConvertUserProperty

Specify whether to convert user properties. (Attribute)

• Default Value: 0
• Values
  • 0: Don’t convert user properties
  • 1: Convert user properties

XConvertView

Specify whether to convert the View.

• Default Value: 0
• Values
  • 0: Don’t convert View
  • 1: Convert View

XConvert3DAnnotationAsPolyline

Specify whether to add polyline for PMI as well as converting as semantic.

• Default Value: 1
• Values
  • 0: Don’t add polyline
  • 1: Add polyline