JT to ENF

Section Name [JT2ENF]

ConvertCSys

Convert Coordinate Systems

  • Default Value: 1
  • Values
    • 0: Don’t convert
    • 1: Convert

ConvertGeneralBody

Convert general body

  • Default Value: 0
  • Values
    • 0: Don’t convert
    • 1: Convert

ConvertGeometryType

Specify the type of the geometry format to convert.
Multiple selection is available by specifying the sum of corresponding values.
Use “Recover Flag” to convert the other type when the specified type does not exist in the input file.
e.g., “ConvertGeometryType=9 (=1+8)” means to usually convert polygon, but convert B-rep instead when polygon does not exist.

  • Default Value: 3

  • Values

    • 1: Convert polygon only

    • 2: Convert B-rep (XT B-rep and native B-rep) only

    • 8: Set Recover Flag
      (Convert the other type when specified type does not exist in the input file)

ConvertLayerFilter

Specify whether to convert layer filters and layer numbers.
The layer number is supported on the body node, wire (isolated curve), PMI, reference plane, reference axis, reference point and coordinate system.
  • Default Value: 1
  • Values
    • 0: Don’t convert layer filters and layer numbers
    • 1: Convert layer filters and layer numbers

ConvertPolygonPointSetAsVertex

Specify whether to convert polygon points to vertices.

  • Default Value: 1
  • Values
    • 0: Don’t convert polygon points
    • 1: Convert polygon points to vertices

ConvertRefAxis

Convert Reference Axis

  • Default Value: 1
  • Values
    • 0: Don’t convert
    • 1: Convert

ConvertRefPlane

Convert Reference Plane

  • Default Value: 1
  • Values
    • 0: Don’t convert
    • 1: Convert

ConvertRefPoint

Specify whether to convert reference points.

  • Default Value: 1
  • Values
    • 0: Don’t convert reference points.
    • 1: Convert reference points.

FlattenBodyNode

Specify how the body node should be converted.

  • Default Value: 1
  • Values
    • 0: Convert the structure of body node to the assembly structure tree, and the leaf body nodes to parts
    • 1: Merge the body node to its parent part node, and convert them as a single part. Convert body nodes as Feature Groups.
    • 2: Merge the body node to its parent part node and convert them as a single part. Do not convert body nodes as Feature Groups.

ForceBodyNode

Specify nodes that are not Body Node in JT, but to treat as Body Node. They will be converted to elements under part in ENF.
Please ensure to specify nodes by their names with “ForceBodyNodeFile” when this is set to “1”.
  • Default Value: 0
  • Values
    • 0: None (Only Body Nodes in source JT file will be converted as Body Nodes.)
    • 1: Nodes specified by name with “ForceBodyNodeFile”
    • 2: All nodes except for the top node

ForceBodyNodeFile

Specify the node name list (file that lists node names to treat as Body Node by their names) by its absolute file path.
Recommended settings (“ForceBodyNode.txt” in the installation folder) will be used instead when this is not set.
This is effective only when “ForceBodyNode=1”.
  • Default Value:

LOD

Select LOD in JT file to be converted.
1-origin Integer. 1 means the minutest polygon. Getting rougher as a value increases.
  • Default Value: 1

ProductMode

Specify whether to apply CADdoctor default setting

  • Default Value: 0
  • Values
    • 0: ASFALIS mode
    • 1: CADdoctor mode

WriteOldFile

Specify the ENF version.
Please use “WriteOldFileRev” to specify ENF revisions.
Below are the supported file versions;
2.2, 2.6, 3.0, 3.2, 3.3
  • Default Value: 0
  • Values
    • 0: Export ENF in the latest version
    • 2: Export ENF in version 2
    • 3: Export ENF in version 3

WriteOldFileRev

Specify the ENF revision.
Please use “WriteOldFile” to specify the ENF version.
Below are the supported file versions;
2.2, 2.6, 3.0, 3.2, 3.3
  • Default Value: -1
  • Values
    • -1: Export ENF of the latest revision
    • 0: Export ENF of revision 0
    • 2: Export ENF of revision 2
    • 3: Export ENF of revision 3
    • 6: Export ENF of revision 6

XConvertDimension

Specify whether to convert Dimension. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Dimension
    • 1: Convert Dimension

XConvertGDT

Specify whether to convert GDT, Datum, DatumTarget. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert GDT
    • 1: Convert GDT

XConvertGraphicDataPMI

Specify whether to convert graphic PMIs such as center line and region as graphic PMIs.

  • Default Value: 0
  • Values
    • 0: Don’t convert
    • 1: Convert as graphic PMI

XConvertLineWeld

Specify whether to convert LineWeld. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Line Weld
    • 1: Convert Line Weld

XConvertLocator

Specify whether to convert Locator. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Locator
    • 1: Convert Locator

XConvertNote

Specify whether to convert Note. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Note
    • 1: Convert Note

XConvertSpotWeld

Specify whether to convert SpotWeld. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Spot Weld
    • 1: Convert Spot Weld

XConvertSurfFinish

Specify whether to convert SurfaceFinish. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert SurfaceFinish
    • 1: Convert SurfaceFinish

XConvertSymbol

Specify whether to convert Custom Symbol. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Custom Symbol
    • 1: Convert Custom Symbol

XConvertUserProperty

Specify whether to convert user properties. (Attribute)

  • Default Value: 0
  • Values
    • 0: Don’t convert user properties
    • 1: Convert user properties
    • 2: Convert public user properties only
    • 3: Convert user public properties except those automatically generated in JT

XConvertView

Specify whether to convert the View.

  • Default Value: 0
  • Values
    • 0: Don’t convert View
    • 1: Convert View