NX I-deas to ENF

Section Name [IDEAS2ENF]

CalcElementNumber

Output the element number in XML log

• Default Value: 0
• Values
  • 0: OFF
  • 1: ON

CalcMassProperty

Output mass properties (Volume, Surface area, gravity) in XML log.

• Default Value: 0
• Values
  • 0: OFF
  • 1: ON

ConvertPartwise

Specify whether to enable “memory saving” mode

• Default Value: 0
• Values
  • 0: Don’t enable memory saving mode
  • 1: Enable memory saving mode

GetAllPart

Specify whether to convert all parts in BIN folder.

Please note that all data in BIN folder will be converted regardless of the value of this parameter when the data in BIN folder are parts only (no assembly).

• Default Value: 0

• Values

  • 0: Don’t convert parts in BIN folder

    (Parts in BIN folder will be converted anyway when there are parts only, and no assemblies.)

  • 1: Convert all parts in BIN folder

ProductMode

Specify whether to apply CADdoctor default setting

• Default Value: 0
• Values
  • 0: ASFALIS mode
  • 1: CADdoctor mode

StructureMode

Specify whether to translate in Assembly Structure mode

• Default Value: 0
• Values
  • 0: Don’t translate in Assembly Structure mode
  • 1: Translate in Assembly Structure mode

SupportWFPoint

Specify whether to convert isolated points.

This is effective only when “UseOiMode=0” (default option).

Isolated points will always be converted when “UseOiMode=1”.

• Default Value: 0
• Values
  • 0: Don’t convert isolated points
  • 1: Convert isolated points

SupportXVL

Specify whether to translate vector annotations (3D Polylines), cameras (Model Views) and material names

(This is the setting for the translation to XVL.)

• Default Value: 0
• Values
  • 0: Don’t translate vector annotations (3D Polylines), cameras (Model Views) and material names
  • 1: Translate vector annotations (3D Polylines), cameras (Model Views) and material names

UseOiMode

Specify whether to convert using OI function to convert maintaining the face transparency. (The face transparency will be lost when converting with IDI function.)

Please note that the arrow of PMI and some elements will be lost when converting with OI function.

• Default Value: 0
• Values
  • 0: Convert using IDI function
  • 1: Convert using OI function

WriteAbstractInstance

Specify whether to translate the abstract instances.

• Default Value: 0
• Values
  • 0: Don’t translate the abstract instances
  • 1: Translate the abstract instances as shown instances
  • 2: Translate the abstract instances as hidden instances

WriteHideInstance

Specify whether to translate hidden instances

• Default Value: 0
• Values
  • 0: Don’t translate hidden instances
  • 1: Translate hidden instances as shown instances
  • 2: Translate hidden instances as hidden instances

WriteOldFile

Specify the ENF version.

Please use “WriteOldFileRev” to specify ENF revisions.

Below are the supported file versions;

2.2, 2.6, 3.0, 3.2, 3.3

• Default Value: 0
• Values
  • 0: Export ENF in the latest version
  • 2: Export ENF in version 2
  • 3: Export ENF in version 3

WriteOldFileRev

Specify the ENF revision.

Please use “WriteOldFile” to specify the ENF version.

Below are the supported file versions;

2.2, 2.6, 3.0, 3.2, 3.3

• Default Value: -1
• Values
  • -1: Export ENF of the latest revision
  • 0: Export ENF of revision 0
  • 2: Export ENF of revision 2
  • 3: Export ENF of revision 3
  • 6: Export ENF of revision 6

WritePruneInstance

Specify whether to translate Prune Instances

• Default Value: 0
• Values
  • 0: Don’t translate Prune Instances
  • 1: Translate Prune Instances as shown instances
  • 2: Translate Prune Instances as hidden instances

WriteSuppressInstance

Specify whether to translate Suppress Instances

• Default Value: 0
• Values
  • 0: Don’t translate Suppress Instances
  • 1: Translate Suppress Instances as shown instances
  • 2: Translate Suppress Instances as hidden instances

XConvertDimension

Specify whether to convert Dimension. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert Dimension
  • 1: Convert Dimension

XConvertGDT

Specify whether to convert GDT, Datum, DatumTarget. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert GDT
  • 1: Convert GDT

XConvertHatching

Specify whether to convert Hatching. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert Hatching
  • 1: Convert Hatching

XConvertLineWeld

Specify whether to convert LineWeld. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert Line Weld
  • 1: Convert Line Weld

XConvertLocator

Specify whether to convert Locator. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert Locator
  • 1: Convert Locator

XConvertMaterial

Specify whether to convert Material. (Attribute)

• Default Value: 0
• Values
  • 0: Don’t convert Material
  • 1: Convert Material

XConvertNote

Specify whether to convert Note. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert Note
  • 1: Convert Note

XConvertSection

Convert Section

• Default Value: 0
• Values
  • 0: Don’t convert
  • 1: Convert

XConvertSpotWeld

Specify whether to convert SpotWeld. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert Spot Weld
  • 1: Convert Spot Weld

XConvertSurfFinish

Specify whether to convert SurfaceFinish. (Annotation)

• Default Value: 0
• Values
  • 0: Don’t convert SurfaceFinish
  • 1: Convert SurfaceFinish

XConvertSystemProperty

Specify whether to convert system properties. (Attribute)

• Default Value: 0
• Values
  • 0: Don’t convert system properties
  • 1: Convert system properties

XConvertUserProperty

Specify whether to convert user properties. (Attribute)

• Default Value: 0
• Values
  • 0: Don’t convert user properties
  • 1: Convert user properties

XConvertView

Specify whether to convert the View.

• Default Value: 0
• Values
  • 0: Don’t convert View
  • 1: Convert View

XConvert3DAnnotationAsPolyline

Specify whether to add polyline for PMI as well as converting as semantic.

• Default Value: 1
• Values
  • 0: Don’t add polyline
  • 1: Add polyline