ENF to STEP¶

Section Name [ENF2STEP]

AnalyticCircle¶

Convert arc as analytical representation.

Default Value: 1
Values
- 0: Convert as NURBS
- 1: Convert as analytical representation

AnalyticEllipse¶

Convert arc of ellipse face as analytical representation.

Default Value: 1
Values
- 0: Convert as NURBS
- 1: Convert as analytical representation

AnalyticRevolution¶

Convert revolved face as analytical representation.

Default Value: 1
Values
- 0: Convert as NURBS
- 1: Convert as analytical representation

AnalyticTabcyl¶

Convert tabcyl face as analytical representation.

Default Value: 1
Values
- 0: Convert as NURBS
- 1: Convert as analytical representation

AnalyticTorus¶

Convert torus face as analytical representation.

Default Value: 1
Values
- 0: Convert as NURBS
- 1: Convert as analytical representation

Author¶

Specify the author name in the header section of the output STEP file.

Default Value:

ConvertDatumAxis¶

Specify whether to convert datum axes. This is available only when translating to STEP version AP203 ed2, AP214 or AP242.

Default Value: 1
Values
- 0: Don’t convert datum axes
- 1: Convert datum axes

ConvertGeometryType¶

Specify the type of the geometry format (exact geometry / tessellated geometry) to convert.

Please note that tessellated geometry will be exported only when “Protocol=242”.

Default Value: 3
Values
- 1: Convert exact geometry (B-rep) if available
- 2: Convert tessellated geometry (polygon) if available
- 3: Convert both exact and tessellated geometry if available

ConvertIsolatedCurveName¶

Specify whether to convert the name of isolated curves.

Default Value: 1
Values
- 0: Don’t convert the name of isolated curves
- 1: Convert the name of isolated curves

ConvertIsolatedPointName¶

Specify whether to convert the name of isolated points.

Default Value: 1
Values
- 0: Don’t convert the name of isolated points
- 1: Convert the name of isolated points

ConvertLayer¶

Convert layer of elements.

(Available only with AP203 ed2 or AP214 or AP242)

Default Value: 1
Values
- 0: not convert layer
- 1: convert layer
- 2: convert layer including face layer

ConvertValidationProperty¶

Specify whether to export validation properties (AVP/GVP/PMIVP/UDAVP) to STEP.
Multiple selection is available by specifying the sum of corresponding values.
This is effective only when “Protocol=242”.

Default Value: 0
Values
- 0: Don’t export validation properties
- 1: Export GVP
- 2: Export AVP
- 4: Export UDAVP
- 8: Export PMIVP

ExternalReference¶

output STEP file with External References (If AP203 is specified, it’ll be exported as AP203 ed2 automatically)

Default Value: 0
Values
- 0: Normal (1file)
- 1: External Part References
- 2: External Part References (avoid same part name, option for NX)

FileFormat¶

Specify the file format of exported STEP file.

Default Value:
Values
- step: Export in Part 21 ASCII format
- step-zip: Export in zip-compressed Part 21 format

FileVersion¶

Specify the STEP file version for data export.

This is effective only when “Protocol=203”.

Default Value: IS
Values
- ED2: Edition2
- IS: International Standard
- TC: Technical Corrigendum

Organization¶

Specify the organization name in the header section of the output STEP file.

Default Value:

ProductMode¶

Specify whether to apply CADdoctor default setting

Default Value: 0
Values
- 0: ASFALIS mode
- 1: CADdoctor mode

Protocol¶

Specify the STEP application protocol for data export.

Default Value: 214
Values
- 203: AP203
- 214: AP214
- 242: AP242
- 242ed2: AP242 Edition2

SavedViewMethod¶

Specify how to convert Saved Views.

This is effective only when both “Protocol=242” and “XConvertView=1” are set.

Default Value: 0
Values
- 0: Convert in accordance with STEP recommended practices
- 1: Convert for data import to Creo Parametric
- 2: Convert for data import to CATIA V5
- 3: Convert for data import to SOLIDWORKS

TessellateAngularTol¶

Specify the tessellation accuracy (maximum allowed deviation from the source exact geometry) by angle tolerance. (Unit: degree)
Specify by a positive real number.
This is effective only when “TessellateGeometry=1”.

Default Value: 15.0

TessellateGeometry¶

Specify whether to tessellate B-rep to polygon.
This is effective only when the following parameters are set;
- “Protocol=242”
- “ConvertGeometryType=2 or 3”

Default Value: 0
Values
- 0: Don’t tessellate
- 1: Tessellate

TessellateLengthTol¶

Specify the tessellation accuracy (maximum allowed deviation from the source exact geometry) by distance (chord height) tolerance. (Unit: mm)
Specify by a positive real number.
This is effective only when “TessellateGeometry=1”.

Default Value: 1.0