CATIA V5 to ENF

Section Name [CAA2ENF]

Annotation

Specify whether to convert annotations and Simple Datum.
This is for To-XVL conversion only.
Please note that “XConvert” parameters will be prioritized when set in combination.
  • Default Value: 0
  • Values
    • 0: Don’t convert annotations and Simple Datum
    • 1: Convert annotations and Simple Datum

Axis

Specify whether to convert the coordinate system (Axis System).

  • Default Value: 1
  • Values
    • 0: Don’t convert Axis System
    • 1: Convert Axis System

BodyName

Specify the attribute in CATIA V5 to use for Name (part / assembly names) in ENF.
This is effective for the legacy adapter only.
  • Default Value: PartNumber
  • Values
    • Nomenclature: Use Nomenclature in CATIA V5
    • PartNumber: Use Part Number in CATIA V5

CalcElementNumber

Specify whether to output the number of elements to XML log.

  • Default Value: 0
  • Values
    • 0: Don’t output number of elements
    • 1: Output number of elements

CalcInnerShellArea

Specify whether to include inner shell area in mass property conversion.

  • Default Value: 1

  • Values

    • 0: Don’t include
      (Convert wetted area only)
    • 1: Include
      (Convert both wetted and inner shell area)

CalcMassProperty

Specify whether to output the mass properties (volume, surface area, and center of gravity) to XML log.

  • Default Value: 0
  • Values
    • 0: Don’t output mass properties
    • 1: Output mass properties

CnvFileSystemInfo

Specify whether to convert the time stamp and the file size.

  • Default Value: 0
  • Values
    • 0: Don’t convert time stamp and file size
    • 1: Convert time stamp and file size

CnvGSMVolumeAsSolid

Specify whether to convert Volume as solid volumes.

  • Default Value: 0

  • Values

    • 0: Don’t convert as solid volumes
      (Convert as skin volumes)

    • 1: Convert as solid volumes

ConvertFaceMoniker

Specify whether to convert persistent entity ID in CATIA V5 to Identification in ENF.

  • Default Value: 0
  • Values
    • 0: Don’t convert CATIA V5 persistent entity ID
    • 1: Convert CATIA V5 persistent entity ID to ENF Identification

ConvertFlexibleAssembly

Specify whether to convert flexible assemblies as flexible assemblies.

  • Default Value: 0

  • Values

    • 0: Don’t convert as flexible assemblies
      (Traverse the assembly tree from the top, and convert the first-found assembly as-is, and apply the instance matrix of its components to all the other sharing assemblies when it is a shared assembly)

    • 1: Convert as flexible assemblies

ConvertGeometryType

Specify whether to convert CGR in CATProduct.

  • Default Value: 0
  • Values
    • 0: Don’t convert CGR (Convert B-rep only)
    • 1: Convert CGR along with B-rep

ConvertInfiniteLine

Specify whether to convert infinite and half-infinite lines.

  • Default Value: 1
  • Values
    • 0: Don’t convert infinite and half-infinite lines
    • 1: Convert infinite and half-infinite lines

ConvertInfinitePlane

Specify whether to convert infinite planes.

  • Default Value: 1
  • Values
    • 0: Don’t convert infinite planes
    • 1: Convert infinite planes

ConvertMasterData

Specify whether to convert Masterdata in CATIA V5 to user attribute in ENF.

  • Default Value: 0
  • Values
    • 0: Don’t convert Masterdata
    • 1: Convert Masterdata to user attribute

ConvertPartwise

Specify whether to run CATIA V5 to ENF conversion with memory-saving mode.

  • Default Value: 0
  • Values
    • 0: Don’t enable memory-saving mode
    • 1: Enable memory saving mode when running CATIA V5 to ENF conversion

ConvertSuppressInstance

Specify whether to convert deactivated instances as hidden instances.

  • Default Value: 0
  • Values
    • 0: Don’t convert deactivated instances
    • 1: Convert deactivated instances as hidden instances

Dimension

Specify whether to convert Dimension.
This is for To-XVL conversion only, and effective only when “Annotation=1”.
Please note that “XConvert” parameters will be prioritized when set in combination.
  • Default Value: 0
  • Values
    • 0: Don’t convert Dimension
    • 1: Convert Dimension

DrwGDT

Specify whether to convert Geometrical Tolerance.
This is for To-XVL conversion only.
Please note that “XConvert” parameters will be prioritized when set in combination.
  • Default Value: 0
  • Values
    • 0: Don’t convert Geometrical Tolerance
    • 1: Convert Geometrical Tolerance

EdgeColorMode

Specify whether to replace the edge color by the face color.

  • Default Value: 0

  • Values

    • 0: Don’t replace the edge color
      (Maintain the original color)

    • 1: Replace the edge color by the face color

Face

Specify whether to convert skin (open shell).

  • Default Value: 1
  • Values
    • 0: Don’t convert skin
    • 1: Convert skin

FaceColor

Specify whether to convert face color.

  • Default Value: 1
  • Values
    • 0: Don’t convert face color
    • 1: Convert face color

FaceTransparency

Specify whether to convert the face/feature transparency.
This is effective only when “FaceColor=1”.
  • Default Value: 1
  • Values
    • 0: Don’t convert the face/feature transparency
    • 1: Convert the face/feature transparency

FlagNote

Specify whether to convert the title of Flag Notes (annotations containing URL).
This is for To-XVL conversion only.
Please note that “XConvert” parameters will be prioritized when set in combination.
  • Default Value: 0
  • Values
    • 0: Don’t convert the title of Flag Note
    • 1: Convert the title of Flag Note

InstancePathDisp

Specify whether to convert the display attribute of instances per instance path.

  • Default Value: 0
  • Values
    • 0: Don’t convert per instance path
    • 1: Convert display attribute of instances per instance path

IsoCurve

Specify whether to convert isolated curves.

  • Default Value: 1
  • Values
    • 0: Don’t convert isolated curves
    • 1: Convert isolated curves

IsoPoint

Specify whether to convert isolated points.

  • Default Value: 1
  • Values
    • 0: Don’t convert isolated points
    • 1: Convert isolated points

Layer

Specify the layer to convert. (only the elements in specified layer will be converted)

Set either an integer number larger than -1 or “Current”
“Current”: Convert elements in current filter only
-1: Convert elements which do not belong to any layers only
0 - 999: Convert elements in the specified layer only. Please ensure to separate values by commas when specifying multiple values.
  • Default Value:

NoShow

Specify whether to convert hidden elements as hidden elements.

  • Default Value: 0
  • Values
    • 0: Don’t convert hidden elements
    • 1: Convert hidden elements as hidden elements

NoShowInstance

Specify whether to convert hidden instances.

  • Default Value: -1
  • Values
    • -1: Apply the settings specified with “NoShow” (parameter for hidden elements conversion)
    • 0: Don’t convert hidden instances
    • 1: Convert hidden instances

PartName

Specify the attribute in CATIA V5 to use for PartName in ENF.
This is effective for the legacy adapter only.
  • Default Value: Nomenclature
  • Values
    • Nomenclature: Use Nomenclature in CATIA V5
    • PartNumber: Use Part Number in CATIA V5

PartNumber

Specify the attribute in CATIA V5 to use for PartNumber in ENF.
This is effective for the legacy adapter only.
  • Default Value: PartNumber
  • Values
    • Nomenclature: Use Nomenclature in CATIA V5
    • PartNumber: Use Part Number in CATIA V5

ProductMode

Specify whether to apply the default conversion settings of other application.

  • Default Value: 0

  • Values

    • 0: Don’t apply
      (Convert in ASFALIS settings)

    • 1: Apply CADdoctor settings

    • 2: Apply settings for XVL conversion

ReplaceTPS

Specify whether to replace PMI symbols (e.g., phi) by SJIS characters.
This is for To-XVL conversion only.
Please note that “XConvert” parameters will be prioritized when set in combination.
  • Default Value: 0
  • Values
    • 0: Don’t replace PMI symbols by SJIS characters
    • 1: Replace PMI symbols by SJIS characters

SkipDefaultPlane

Specify whether to skip the default plane conversion.

  • Default Value: 0

  • Values

    • 0: Don’t skip
      (Convert the default plane)
    • 1: Skip the default plane conversion
      (Don’t convert the default plane)

StructureMode

Specify whether to convert in Assembly Structure mode (convert only the assembly structure without part information).

  • Default Value: 0

  • Values

    • 0: Don’t convert in Assembly Structure mode
      (Convert part information as well)

    • 1: Convert assembly structure only

SupportV4

Specify whether to convert CATIA V5 models which contain CATIA V4 models.
Please note that this requires the license of ASFALIS CATIA V4 ENF Writer as well.

  • Default Value: 0

  • Values

    • 0: Don’t convert
      (Skip CATIA V4 model conversion, and convert CATIA V5 model only)

    • 1: Convert CATIA V5 models which contain CATIA V4 models

TransparencyFifty

Specify whether to change the transparency (convert the transparency value “0” as is (“0% transparent”), and “1 - 255” as “50% transparent”).
0: Similar to CATIA V5 Alpha Blending mode
1: Similar to CATIA V5 Screen Door mode

  • Default Value: 0

  • Values

    • 0: Don’t change the transparency
      (Maintain the original transparency)
    • 1: Change the transparency
      (Convert “0” as is, and “1 - 255” as “50% transparent”)

TrimSurfaceMode

Specify whether to trim surfaces by the minimum patch to contain the face during CATIA V5 to ENF conversion.

  • Default Value: 4
  • Values
    • 0: Don’t trim surfaces, except for the offset surfaces which consist of 2 or more patches
    • 1: Trim surfaces by the minimum patch to contain a face
    • 4: Trim surfaces, but don’t trim revolved surfaces on the side of the closing direction (perpendicular to the axis)

WriteOldFile

Specify whether to export ENF files in older versions, and the ENF version.
Please set the revision with “WriteOldFileRev”. (This is not mandatory.)
Below are the supported file versions;
2.2, 2.6, 3.0, 3.2, 3.3
  • Default Value: 0
  • Values
    • 0: Export ENF in the latest version
    • 2: Export ENF in version 2
    • 3: Export ENF in version 3

WriteOldFileRev

Specify whether to export ENF files in older versions, and the ENF revision.
Please ensure to set in combination with “WriteOldFile”.
Below are the supported file versions;
2.2, 2.6, 3.0, 3.2, 3.3
  • Default Value: -1
  • Values
    • -1: Export ENF in the latest revision (The latest revision of the specified version will be selected automatically)
    • 0: Export ENF in revision 0
    • 2: Export ENF in revision 2
    • 3: Export ENF in revision 3
    • 6: Export ENF in revision 6

WriteProperty

Specify whether and when to convert user attributes.
This is for To-XVL conversion only.
Please note that “XConvert” parameters will be prioritized when set in combination.
This is effective for the legacy adapter only.
  • Default Value: No
  • Values
    • All: Convert user attributes on the top assembly, sub-assemblies and parts (Same as “WriteProperty=Yes”)
    • No: Don’t convert user attributes
    • Part: Convert user attributes on parts only
    • TopAssyAndPart: Convert user attributes on top assemblies and parts only
    • Yes: Convert user attributes on the top assembly, sub-assemblies and parts (Same as “WriteProperty=All”)

XConvertDimension

Specify whether to convert Dimension. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Dimension
    • 1: Convert Dimension

XConvertGDT

Specify whether to convert Geometrical Tolerance, Datum, Datum Target. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Geometrical Tolerance
    • 1: Convert Geometrical Tolerance

XConvertLineWeld

Specify whether to convert Weld Symbol. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Weld Symbol
    • 1: Convert Weld Symbol

XConvertMaterial

Specify whether to convert Material. (Attribute)

  • Default Value: 0
  • Values
    • 0: Don’t convert Material
    • 1: Convert Material

XConvertNote

Specify whether to convert Text (note). (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Text
    • 1: Convert Text

XConvertSpotWeld

Specify whether to convert SpotWeld. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Spot Weld
    • 1: Convert Spot Weld

XConvertSurfFinish

Specify whether to convert Roughness. (Annotation)

  • Default Value: 0
  • Values
    • 0: Don’t convert Roughness
    • 1: Convert Roughness

XConvertSymbol

Specify whether to convert a Note Object Attribute.

  • Default Value: 0
  • Values
    • 0: Don’t convert Note Object Attribute
    • 1: Convert Note Object Attribute

XConvertSystemProperty

Specify whether to convert system properties. (Attribute)

  • Default Value: 0
  • Values
    • 0: Don’t convert system properties
    • 1: Convert system properties

XConvertUserProperty

Specify whether to convert user properties. (Attribute)

  • Default Value: 0
  • Values
    • 0: Don’t convert user properties
    • 1: Convert user properties

XConvertView

Specify whether to convert cameras, captures and layer filters. (View)

  • Default Value: 0
  • Values
    • 0: Don’t convert the view.
    • 1: Convert the view.

XConvert3DAnnotationAsPolyline

Specify whether to also add polyline when converting annotations as semantic PMI.

  • Default Value: 1
  • Values
    • 0: Don’t add polyline
    • 1: Add polyline