1. CSV Log Files


Description of CSV Log Files
 
Log files are produced when the user runs diagnostics with CADdoctor for NX.
CSV Log Files are exported into "result CSV file directory" which is set during installation.
Default path is "C:\Elysium\CADdoctor_for_NX\log"

CSV Log Files for PDQ Diagnostic Results (JOBID_user name_PDQ.csv)
 
Log files for PDQ diagnostic results consist of the following three items:
  • Header: Indicates the time at which diagnostics were run.
  • Summary information: Gives diagnostic results for each part.
    		•
  • Check Results: Indicates detailed PDQ diagnostic results for each part.
    		•
    1. Checker is not executed for the parts which has a flag and the check results of the parts are not exported to the log file when the Run Options of Check-Mate "Skip checking if Check Flag is up-to-date" is checked.
    2. Check results of the parts for which diagnostics were canceled are exported to the log file as spaces.
    3. Check results of the parts which has no elements are exported to the log file as spaces.

    CSV Log Files for PDQ Healing Results (JOBID_user name_heal.csv)
     
    CSV Log Files for PDQ Healing Results have following informations beginning at the left.
    - JOBID (year(last two digits){month{day{timej
    - User Name
    - Part Name (UG Part Attribute DB_PART_NAME)
    - Part No. (UG Part Attribute DB_PART_NO)
    - Start Time
    - Healing Time
    - CADdoctor for NX Version
    - Process Mode
    - Healed (yes/no)


    Timing of Log File Output
    Log files are produced 30 seconds after diagnostics.

    If multiple parts are diagnosed, all diagnostic results will be aggregated 30 seconds after all parts are subjected to diagnostics, after which the logs providing aggregate information are produced.
    If you specify the Holding license time after process(sec), the log files are produced according to the specified value.